18 Crock Pot Recipes To Make Christmas Morning Easier (2024)

FAQs

Is 4 hours on high the same as 8 hours on low in a slow cooker? ›

The difference between "High" and "Low" on slow cookers seems to differ with every brand and model. One thing that is consistent, though, is that food takes seven to eight hours to reach a simmer point (around 210°) on low; versus three to four hours on high.

Fattier meats and dark meat chicken are better options, as leaner cuts may dry out during the cooking process. Fattier meats are good, but trim the fat away before placing in the Crockpot slow cooker.

Never ever put liquid into the base of a slow cooker. It was not designed for that and clearly states not to immerse the base in water. The heating element and components are not in a waterproof environment. You will quickly ruin the heating element and risk injury from electrical leakage into the metal base.

Yes, you can add raw steak to a slow cooker to cook it to your desired doneness level.

If possible, turn the cooker on the highest setting for the first hour of cooking time and then to low or the setting called for in your recipe. Foods take different times to cook depending upon the setting used. Certainly, foods will cook faster on high than on low.

If a recipe calls for cooking on the HIGH setting for three hours, you can cook it for seven hours on the LOW setting instead. Or if a recipe calls for eight hours on HIGH, it can be cooked for up to 12 hours on LOW.

Place firm, slow-cooking root vegetables like potatoes and carrots at the bottom of the crock and pile the meat on top. Set the heat level: A general rule of thumb is that cooking on the low setting (170 degrees F for most models) takes about twice as long as cooking on high (280 degrees F on most models).

However, Crockpots generally have ceramic or porcelain pots, while most slow cookers have a metal pot. As with a lot of cooking appliances, the biggest difference comes from the distribution of heat.

Tender vegetables

Vegetables such as peas, asparagus and peppers can become a flavorless, mushy mess in a slow cooker. Stick to heartier root vegetables like potatoes, onions, leeks and yams, or wait to add the tender vegetables until the last 30 minutes or so of cooking time.

Yes, you most certainly can cook raw meat in the slow cooker! You put it in “cold”, with whatever liquid your recipe calls for, turn it on either “low” or “high” depending on your recipe (I usually start it on “high” for a couple hours, then turn it to “low”), and in 6–7–8 hours, it's now COOKED meat!

Can you put raw onions in slow cooker? ›

Before Cooking

Spray your slow cooker with a non-stick spray (an olive oil sprayer is great for this as well). Add raw onions into your slow cooker. Drizzle with olive oil then cover and cook on low heat for 10-14 hours.

If you don't have enough liquid in the pot, the carrots won't cook evenly and may stay tough. Aim for at least a cup or two of liquid, enough to reach about a third of the way up on the ingredients.

"Browning, or caramelizing, meat before putting it into a slow cooker isn't 100 percent necessary, but it is well worth the effort for the most flavorful and full-bodied end result," he says. "The caramelized surface of the meat will lend rich flavor and color to the finished dish."

If a dish usually takes: 15-30 mins, cook it for 1-2 hours on High or 4-6 hours on Low. 30 mins – 1 hour, cook it for 2-3 hours on High or 5-7 hours on Low. 1-2 hours, cook it for 3-4 hours on High or 6-8 hours on Low.

Let's say you want to slow cook a pork roast recipe that calls for 8 hours on Low, but you need it done in much less than 8 hours. Switching to High for the sake of time savings can leave you with a roast that's dried out or even burned on the exterior, but undercooked and not at a food-safe temperature in the center.